This is the full specification of what lands in your inbox. But you shouldn’t have to take my word for it — so below are two complete packs from real jobs, with the client’s details removed, free to download and inspect.
I’ve deliberately chosen two jobs documented to different depths, because the right depth depends on how your shop works. Open both and you’ll see exactly where the line sits.
Download a real pack
No sign-up. Watermarked, but fully legible — you’re meant to be able to read the drilling positions.
Option 1 · Module level
Fitted Kitchen with Sloped Ceiling
21 modules · 18/20 sheets · 2025 · PDF + XLSX · 2.5 MB
Every module drawn as an assembly — dimensioned, sectioned, with its own parts and hardware specification. Individual panels are not given separate sheets; the shop works from the assembly drawing and the cutting list.
The right depth when your machinists are experienced, your construction methods are standardised, and you’d rather not pay for detail you won’t read. Also the faster and cheaper of the two to produce.
In the download
- 18 module drawing sheets (PDF, A1)
- Product structure — module and sub-assembly breakdown
- Complete parts list and cutting list
- Material summary, and material summary by product
- Separate cutting and laminating list
Worth opening sheet 1: the ceiling slope is shown as a translucent volume over the run, which is how the geometry gets agreed with the client before a panel is cut.
Option 2 · Part level
Vanity Unit — a drawing for every panel
4 modules · 40 sheets · 2026 · PDF + XLSX · 6.8 MB
Everything in option 1, and then every individual panel gets its own dimensioned sheet — drilling positions, hole diameters and depths, face identification, edge banding by side, grain direction.
The right depth when the drawing travels with the part to the machine, when you’re working with agency or rotating staff, or when nothing should be left to interpretation. Four modules, forty sheets — that ratio is the whole point.
In the download
- General arrangement with four cross-sections
- Exploded view with balloon references
- Front grain and pattern coordination sheet
- Carcass and three drawer modules as assemblies
- An individual sheet for every panel
- Aluminium GOLA profile detail sheets
- Product structure, parts list, cutting list, hardware schedule
Worth opening any w sheet: one panel, its four edge-banding callouts, and every hole positioned and sized. That is what “part level” means in practice.
Title blocks in these two samples are in Lithuanian, which is where the work was produced. Your packs are drawn in your language, your title block, and your part numbering — that’s what the standards call at the start of a first engagement is for. Client, address and order-number fields have been left blank.
Which depth does your shop need?
Most clients settle this in the first ten minutes of the standards call. If you’re not sure, download both and show them to the person who’d be cutting.
Module level suits you if…
- Your machinists are experienced and long-serving
- Construction methods are standardised across jobs
- Your CNC works from the cutting list and nesting data
- You want the lowest documentation cost per module
- Volumes are higher and parts repeat
Part level suits you if…
- The drawing goes to the machine with the part
- You use agency, rotating or newly trained staff
- Panels are one-offs rather than repeats
- Hardware is dense and positions are critical
- A remake costs more than the documentation would have
You can also mix them, and many clients do — part-level sheets for the complicated modules, module level for the boxes. Tell me which is which and the pack comes back that way.
The full specification
Everything available, whichever depth you choose.
Drawings (PDF)
- General arrangement: elevations, plan, key dimensions, material and finish references
- Assembly drawings with balloon references and exploded views
- Sections: vertical, horizontal, junctions, clearances, interfaces
- Part sheets: dimensioned, with drilling positions, hole diameters and depths, face identification, edge treatment by side, grain direction
- Setting-out and fixing information where the scope includes installation
Production data (editable XLSX)
- Product structure — module and sub-assembly breakdown
- Complete parts list — part ID, material, finish, thickness, quantity, dimensions
- Cutting list — dimensions, grain direction, edge banding by side with material and thickness
- Material summary — by type, thickness and area, for procurement
- Hardware schedule — full specification with your supplier references
Machine data (where in scope)
- DXF of flat parts for nesting
- Drilling and machining information agreed to your CAM requirements
- Flat patterns for sheet metal components
Tell me your machinery and CAM setup on the standards call and this arrives configured for it from the first job rather than the third.
On request
- STEP for coordination with other trades
- Native Inventor files (IPT/IAM) — supplied where you have Inventor and Woodwork for Inventor; otherwise they are of no practical use to you, and I’ll say so rather than sending them
Why the lists always match the drawings. All of it is generated from one parametric model in Autodesk Inventor with Woodwork for Inventor, which produces the BOM, cutting lists and material summaries directly from the geometry. Change one dimension and every sheet, schedule and list updates together. Nothing is retyped, so nothing drifts out of sync — which is where most documentation errors come from.
Seen enough? Send me a design
A PDF, a DWG, a survey, or a photograph of a sketch is plenty to quote from. You’ll get a price, a timescale, and a recommendation on which depth the job actually needs — within one working day.
